MB5 Mixture of MIT & BIT

MB5 Biocide (Formula biocide of Methylisothiazolinone and Benzisothiazolinone)

Product name: MB5

CAS No.: MIT & BIT 2682-20-4 & 2634-33-5;

Composition: 1,2-benzisothiazoline-3-one; Methylisothiazoline

Application: Industrial Microbicide

MB 5 biocide is an aqueous solution of BIT (1,2-Benzisothiazolin-3-one) and MIT(2-Methyl-4-isothiazolin-3-one) at a ratio of 1:1 for the in-can preservation of technical products.It is a VOC- and AOX-free preparation. It is formulated without the addition of any organic solvents, halogenated organic compounds, formaldehyde releasing compounds or bivalent metal ions, and therefore, it is highly compatible in most binder and paint systems.

The formula biocide combines the well proven active ingredients BIT and MIT which can provide a long-term and broad efficacy spectrum.

Composition: (Chemical characterization: Mixtures )

Specification:

Miscibility/Solubility

Miscible with water and most low alcohols, glycols and glycol ethers, clearly soluble in water at ready to use concentrations.

Application field

MBT formula biocide could be used to protect latex paints, polymer emulsions, adhesives, enamels, fillers, sealants and other water-based products from harmful microorganisms when they are wet, especially suitable for products with higher pH values and environmentally friendly formulas.

Characteristics

1) It is a new generation of synergistic type without CIT (5-chloro-2-methyl-4-isothiazolin-3-one), AOX (adsorbable organic halide) and VOC (organic volatile matter) Fungicide.

2) Wide applicable pH range, can be used in the range of 2.0 ~ 10.0.

3) Do not add any organic solvents, halogenated organic compounds, formaldehyde releasers or divalent metal ions.

4) It has a very broad-spectrum bactericidal activity against bacteria, molds and yeasts that cause pollution and degradation of aqueous products.

5) Easily soluble in water, most lower alcohols and glycols.

Usage and precautions:

1) It is recommended to use a concentration of 0.2-0.4%. Select the appropriate dosage according to the product used and the environmental conditions.

2) This product should avoid direct contact with eyes. Once in contact, rinse immediately with plenty of water without delay. Do not contact with skin for a long time

3) It should be noted that the temperature, pH value and redox potential during addition will not affect the stability of this product.

4) Store in the original container. Avoid extreme temperatures. Frost easily, BIT and BIT sodium salt may crystallize when the temperature is lower than 1℃; However, if it is heated to a maximum of 50℃, any crystals formed will dissolve again without affecting the performance.

Package & Storage:

25kg/drum or 200kg/drum or IBC drum ,and then wrapped in pallets to ensure the cargos are not damaged during transportation.

Stored in a dry, cool and sealed place, avoid light, storage period of 12 months.

Mode of Transport:

Multiple transportation methods could be selected by customers, including Ocean Transport, Air Transport, Rail Transport and Courier Transport. Our priciple is to delivery the goods reached to customers with shortest time and ecomomic trasnport mode, safe and fast.

Quality Inspection Center

Sinotrust strictly control goods quality, each lot must be strictly inspected by QA dept. The goods will be allowed to leave factory only after quality qualified. Meanwhile the sample for each lot will be kept in lab at least one year. When issues happened, we or the third authority party could reinspect.

Before new customers issue order, free sample will be supplied for test. And we ensure the sample quality is same as bulk quality.

Our service - Right Partner, Better Future.

With more ten years experience in industrial biocide, preservatives and mold inhibitor, We provide comprehensive customer service from the initial consultation to the final delivery of your order. We always serves with enthusiasm and accepts full responsibility in customers' work.Our priority is your satisfaction and growing solid relationships with each of our customers.

You are incharged for signing the contract, all the rest will be done by us. We guarantee belows:

1) Goods quality will be same as samples, or COA which supplied to you firstly.

2) Package also could be done accordingly to cusotmer's request, safe and good look. Conform to standard of dangerous goods shipment. And photoes will be taken during the process of container load, which will be supplied to each customers.

3) Shipment will be done by us, booking the direct, non-transfer vessel for prompt shipment. And shipping details will be advised.

4) After vessel left, the full set shipping docments will be scaned & deliveried to you on time.

5) Any issues after picking up goods or during the usage, pls contact us without hesitation.

As we expand our business all around the world, we look forward to cooperating with you in the near future.