DBNPA 20 CAS 10222-01-2

DBNPA 20 for Reverse osmosis special fungicide CAS 10222-01-2

Product Name: 2.2-Dibromo-3-Nitrilopropion Amide 20% Solution 

Short name: DBNPA 20% solution (DB 20) 

CAS No.: 10222-01-2

Description:

DBNPA 20 reverse osmosis special fungicide is a fast-acting broad-spectrum fungicide. For reverse osmosis membrane desalination systems that utilize industrial wastewater, seawater, and other surface waters containing microbial sources as a source of water, biocontamination of membrane fouling is a ubiquitous problem. The incompatibility of chlorine gas and other oxidizing biocides commonly used in water treatment with polyamide reverse osmosis limits the use of such bactericides. It is a class of non-oxidizing biocides used to control microbial special biocides in reverse osmosis membrane systems.
The active ingredient is a formulation having a 2,2-dibromo-3-nitropropionamide content of 20%. It is effective at very low concentrations and can kill bacteria, fungi and yeast on a broad spectrum. Its antimicrobials are completely miscible with water and are therefore easily dispersed into the system. Effective sterilization is usually achieved in just a few minutes, rather than a few hours.

Specification

Features

DBNPA 20% fungicide is a water-soluble formula. The rational use of this fungicide can bring many advantages to the reverse osmosis membrane system:

1. Non-oxidizing bactericide, does not affect the stability of chemical and physical structure of reverse osmosis membrane

2, fast sterilization speed, low concentration

3. Extensive killing of bacteria, fungi, yeast and algae microorganisms

4, the original liquid is added directly, easy to use

Application

It has been widely used in industrial water and reverse osmosis and papermaking water systems, and is effective against bacteria, fungi, yeasts, blue-green algae and other algae even at low concentrations. The bactericidal active ingredient can act immediately after entering the aqueous phase of the reverse osmosis membrane system. Because of its extremely rapid sterilization, it can greatly reduce or even completely eliminate the proliferation of microorganisms and the biofilm formed by the surface of the reverse osmosis membrane and the inlet channel. At the same time, its rapid degradability minimizes environmental concerns. It is important to note that when DBNPA-20 solution is applied to a reverse osmosis membrane system, it is largely repelled by the composite membrane and the residual amount at the drain end is very low.

Use concentration

1. Online addition of industrial water (circulating cooling water):

Continuous addition, recommended dose is 2-10ppm

2. Off-line cleaning of industrial water:

Depending on the amount of total solution in the feed water tank, 200 ppm to 400 ppm of DBNPA-20 was added. After the completion of the aqueous solution transfer, the cells are circulated or inactivated for 1 to 3 hours to ensure that all of the reverse osmosis membrane modules are in sufficient contact with DBNPA-20. In the DBNPA-20 environment, Vancide-DBNPA-20 can be quickly decomposed. The rapid bioavailability of Vancide-DBNPA-20, combined with rapid chemical decomposition, is the most economical way to eliminate microbial contamination with minimal impact on the finished product. Vancide-DBNPA-20 generally kills 99 before it is fully resolved to lose its effectiveness. After the cleaning process, start flushing with water. The water circulation flushing process recommends draining the water from the three systems to ensure that the biocide solution is thoroughly rinsed from the entire reverse osmosis system.

Note:

Do not add DBNPA-20 to the influent water of a reverse osmosis system that still has sodium bisulfite or other reducing agents. The addition of various reducing agents must be suspended at least 15 minutes prior to the addition of DBNPA-20 to avoid loss of facial active ingredients.

Storage: It can be stored for 12 months under normal temperature conditions.

Package：25kg blue square plastic bucket, or 200kg blue round bucket, the packaging is not recycled.

Transport Mode:

Multipletransportation methods can be selected, Sea Transport, Air Transport, Express Transport and Railway Transport. The transport method will be done according to customers' request. Our priciple is to delivery the goods reached to customers with shortest time and ecomomic transport mode, safe and fast.

Quality Testing Center:

We have strict requirements on product quality, In order to control the quality of our products, the production department performs product quality inspection on each batch of cargo produced with advanced equipment for testing and manufacturing. Before our new customer places an order, we can send the sample for your testing. We ensure the quality is the same as bulk quality.

Our service

With more ten years experience in industrial biocide, preservatives and mold inhibitor, We provide comprehensive customer service from the initial consultation to the final delivery of your order. We always serves with enthusiasm and accepts full responsibility in customers' work.
We have own specialized quality control center, to improve the goods quality. Our professional R & D team will provide continuous technical service support to our customer. With the long-term cooperation with customers from all over the world, we have opened up new business scopes. We always adhere to customer-centricity, focus on product quality, respond quickly to customer needs, and provide customers with stable and reliable products.